HOGUE INC ANNOUNCES THEIR FIXED MAGAZINE SOLUTION: THE FREEDOM FIGHTER™

imageHenderson, NV – Hogue Incorporated is proud to announce the Freedom Fighter, their AR-15 fixed magazine solution. “Many shooters are desiring a way to convert their AR to a fixed magazine,” said Hogue owner Patrick Hogue. “When installed properly, the Freedom Fighter blocks the magazine release until the rear pin is removed and the upper receiver is lifted upward and away from the lower receiver.”
The Freedom Fighter contains a drill jig, drill bits, bushings, springs, pins and the set screws necessary for three installations. To ensure proper operation, a qualified gunsmith is
recommended for installation as modification to the firearm is required. When the jig is inserted into the mag well a hole is drilled into the lower receiver creating a tunnel to accommodate the Freedom Fighter plunger pin and spring. The pin is retained with a set screw. Once the rifle is reassembled with the Freedom Fighter installed, the pin will not allow the mag catch to operate
unless the upper receiver is swung open putting the firearm in a “disassembled” configuration.
The patent-pending Hogue Freedom Fighter will keep your firearm looking completely original after conversion. Once installed, it is simple to return the firearm to detachable magazine capability. The Freedom Fighter has an MSRP of $49.95 with a refill kit for three additional installations available for $29.95. The installation video is viewable at http://www.hogueinc.com.
All Hogue products are manufactured in family-owned and operated facilities under the direct supervision of the Hogue family. Hogue, Inc. supports local dealers and encourages customers to purchase Hogue products locally. For more information please call Hogue directly at 1-800-438-4747 or visit www.hogueinc.com to find a Hogue dealer near you.

imageimage

image

This entry was posted in Accessories and tagged , . Bookmark the permalink.